Siemens SIMATIC PC 670 V2 Installation Manual page 29

General Information
USB Keyboardcontroller
The following additional functions are supported by the USB Keyboardcontroller:
• Keyboard programming
• Brightness control of the back-lighting
• Control of the key LEDs
A condition for using these functions is that the USB Keyboardcontroller has been
installed. Refer to the descriptions on the CD for details on the installation routine.
Touchware (only for touch panels)
Installation is started by calling in the menu from the Docu & Drivers CD. Details on
the installation are provided in the relevant instructions on the Docu & Drivers CD.
The Drawing and Right-click settings should be defined as active default settings
under Touchsetting and Touchmode, respectively. The Right-click option enables
the simulation of the right mouse button on a unit with a touch panel.
Release 06/04