Wired Status; Set To Default; Wired Enable; Print Reports - Fuji Xerox DocuPrint P235 db Online User's Manual

Level 1 Level 2
Wired LAN TCP/IP
Ethernet

Wired Status

MAC Address

Set to Default -

Wired Enable

Network Reset Network Reset
1 On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the 'Boot Method' of the machine is set to 'Static' you must manually enter an IP address from the machine's control panel.

[Print Reports]

Level 1
Print Settings
Network Config
(For network models)

Print File List

(Available only for certain models)
Drum Dot Print
WLAN Report
(For wireless models)

[Machine Info.]

Level 1 Level 2
Serial No. -

Firmware Version -

Page Counter -
1 Toner Life Display the remaining life of the toner cartridge.
Parts Life
Drum Life
Level 3 Level 4
Subnet Mask -
Gateway -
Node Name
-
WINS Config -
WINS Server Primary
Secondary Specify the IP address of the secondary WINS
DNS Server Primary
Secondary Specify the IP address of the secondary DNS
APIPA -
IPv6 -
- -
- -
- -
-
- -
- -
Level 2 Description
- Print the Printer Settings page.
- Print the Network Configuration Report.
- Print a list of data saved in the memory.
- Print the Drum Dot Check Sheet.
- Print the wireless LAN connectivity diagnosis result.
Description
Display the machine's serial number.
Check your machine's firmware version.
Display the total printed pages.
Display the remaining life of the drum unit.
Descriptions
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
Select the WINS configuration mode.
Specify the IP address of the primary WINS
server.
server.
Specify the IP address of the primary DNS
server.
server.
Allocate the IP address from the link-local
address range automatically
Enable or disable the IPv6 protocol.
Choose the Ethernet link mode.
Display the Ethernet link status.
Display the MAC address of the machine.
Restore wired network settings of your machine
to the factory settings.
Turn the wired interface on or off.
Restore all network settings of your machine to
the factory settings.
1
.
227