Table of Contents
Advertisement
2 Remove the upper and lower screw on the side panel of the
switch box.
3 The right panel of the switch box will open.
4 Remove the upper and lower screw on the front panel of the
switch box.
5 The front panel of the switch box will open.
4
2×
When the boiler is installed and access to the switch box is required,
please follow the steps below.
6 Remove the upper and lower screw on the side panel of the
switch box.
7 Remove the switch box from the unit.
8 Hook the switch box to the side of the unit with the hooks
foreseen on the switch box.
8
4.2
Mounting the indoor unit
4.2.1
To install the indoor unit
1 Put the installation pattern (see box) on the wall and follow the
steps as shown below.
CHYHBH05+08AA
Daikin hybrid for multi heat pump – heat pump module
4P471756-1C – 2017.10
2
2×
3
5
6
7
6
1
2 Fix the wall bracket to the wall with 2 M8 bolts.
3 Lift the unit.
30kg
4 Tilt the top of the unit against the wall at the position of the wall
bracket.
5 Slide the bracket on the back of the unit over the wall bracket.
Make sure the unit is fixed properly. You can additionally fix the
bottom side of the unit with 2 M8 bolts.
6 The unit is mounted to the wall.
4 Installation
2
3
2×
Installation manual
7
Advertisement
Table of Contents
