Repair Information - York YK-SMU2x0-0 Installation Instructions Manual

Yccs system manager and zone coordinator

Hide thumbs

Table Of Contents

Table of Contents

•

Check bus voltages:

(+) to COM must be within 2.0 to 3.0 VDC

(-) to COM must be within 1.5 to 2.54 VDC

(+) to (-) must be within 0.3 to 1.0 VDC

Note: Values may fluctuate due to ongoing

communications, this operation is normal provided

the voltage is within the defined range.

Technical Specifications

YCCS System Manager Controller

Product Code Number

Power Supply Requirement

Power Consumption

Ambient Conditions

Processor

Memory

Housing

Mounting

Dimensions

(Height x Width x Depth

Shipping Weight

Compliance

YCCS System Manager and Zone Coordinator Installation Instructions

YK-SMU200-0: System Manager with color touch-screen user interface and Ethernet

port for Web browser access.

YK-SMU210-0: System Manager with color touch-screen user interface and Ethernet

port for Web browser access, and optional internal modem.

Dedicated nominal 24 VAC, Class 2 power supply (North America) at 50/60 Hz

(20 VAC minimum)

20 to 30 VAC at10 VA

Ambient Operating Conditions: 0 to 50°C (32 to 122°F); 5 to 95% RH condensing

Ambient Storage Conditions: -40 to 85°C (-40 to 185°F); 10 to 90% RH

192 MHz Renesas SH4 7760 RISC processor

128 MB Flash nonvolatile memory for operating system, configuration data, and

operations data storage and backup

Plastic housing material: ABS + polycarbonate UL94-5VB

Protection: IP20 (IEC 60529)

With screws on a flat surface or a four square box enclosure

250 x 190 x 60 mm (9-13/16 x 7-1/2 x 2-7/16 in.)

0.89 kg (1.97 lb)

United States

UL Listed, File E107041, CCN PAZX, UL 916

FCC Compliant to CFR47, Part 15, Subpart B, Class A

Canada

UL Listed, File E107041, CCN PAZX7, CAN/CSA C22.2 No. 205, Signal Equipment

Industry Canada Compliant, ICES-003

•

Check addresses

Check for duplicate addresses

Verify the address range is sequential