Instruction manual
TROUBLESHOOTING
CAUTION! Switch off and remove plug from mains before investigating fault.
EN
Conventional trouble
Motor does not start
Motor shuts down
The machine leaves an unevenly
cut path
The blade (25) won't turn
If the problem cannot be remedied on the basis of the information above, please take the device to an authorized
IVT Service Center.
Trouble reason
∙
Power supply is absent.
∙
The outlet is defective.
∙
The extension cord is damaged.
∙
The grass is too long.
∙
The safety button has been
tripped.
∙
Line
voltage
does
correspond to the rating on the data
plate.
∙
The extension cord is damaged.
∙
Internal wiring defect.
∙
The cutting height is too low.
∙
The blade (25) is dulled.
∙
The lower part of the machine
is blocked.
∙
The
blade
is
mounted (reversed).
∙
The blade (25) is blocked with
grass.
∙
The blade-fixing screw (26) has
come undone.
14
∙
Check power supply.
∙
Try another outlet, replace the
outlet if necessary
∙
Check the cable, replace if
necessary.
∙
Increase the mowing height.
∙
Allow the engine to cool then
increase the cutting speed.
not
∙
Use the proper line voltage
∙
Check the cable, replace if
necessary.
∙
Contact an authorized Service
Center.
∙
Change the mowing height.
∙
Replace the blade (25).
∙
Clean the machine.
incorrectly
∙
Turn the blade (25) round and
mount it correctly.
∙
Remove the grass.
∙
Tighten the blade-fixing screw
(26).
Remedy