NOTE:
Place the chassis on the edge of a table with the display facing down.
a
Remove the 3 (M2.5x8) screws and lift the display hinge secured to the computer [1].
b Lift and remove the display assembly [2].
Installing the display assembly
1
Align the display assembly with the chassis.
2
Route the WLAN and display assembly cables through the cable-securing tabs.
3
Tighten the display hinges 3 (M2.5x8) screws to secure the display assembly.
4
Install the:
a
WLAN Card
b
Hard drive assembly
c
Base cover
d
Keyboard
e
Optical drive
f
Battery
5
Follow the procedure in
Display bezel
NOTE:
Non-touch display panel
40
Removing and installing components
After working inside your
computer.