d
Optical drive
e
Battery
5
Follow the procedure in
Installing the hard drive assembly
1
Insert the hard drive assembly into the slot on the computer.
2
Tighten the 4 (M2x3) screws to secure the hard drive assembly to the computer.
3
Connect the hard drive cable to the connector on the system board.
4
Install the:
a
Base cover
b
Keyboard
c
Optical drive
d
Battery
5
Follow the procedures in
Fingerprint reader
Removing the fingerprint reader
1
Follow the procedure in
2
Remove the:
a
Battery
b
Optical drive
c
Keyboard
d
Base cover
e
Hard drive
3
To remove the fingerprint reader bracket:
a
Disconnect the fingerprint reader from the connector on the system board [1].
b Remove the tape that secures the fingerprint assembly to the computer [2]
c
Remove the 1 (M2x2.5) screw that secures the fingerprint assembly to the computer [3].
d Lift the fingerprint reader bracket from the computer [4].
After working inside your computer
After working inside your computer.
Before working inside your
computer.
Removing and installing components
21