Installing the coin cell battery
1
Insert the coin cell battery into the battery slot.
2
Press the battery until it clicks into place.
3
Install the:
a
Basecover
b
Keyboard
c
Optical drive
d
Battery
4
Follow the procedures in
Power button board
Removing the power button board
1
Follow the procedure in
2
Remove the:
a
Battery
b
Optical drive
c
Keyboard
d
Base cover
3
To remove the power button board:
a
Disconnect the system board cable from the computer [1].
b Remove the display hinge screws (M2.5x8) from the computer [2].
c
Flip the display hinge to reveal the power button board beneath the hinge [3].
d Remove the 1 M2x2 (Big head07) screw that secures the power button board to the chassis [4].
e
Peel the system board cable from the chassis and the peel the tape that holds the power button board.
f
Slide the Power button board away from the chassis.
After working inside your
Before working inside your
computer.
computer.
Removing and installing components
27