To Manipulate A Function - Leupold RX-1600i TBR/W Complete Operating Instructions

To initiate rangefinder setup mode, press the POWER button to activate the unit,
then press and hold the MODE button for 2 seconds to enter the Quick Set Menu .
TM
To manipulate a function, press and release the MODE button until that function
is flashing, then use the POWER button to change the setting . If this is the last
function to be changed, you can allow the rangefinder to sit idle for 20 seconds
which will cause an automatic power-off, saving all selections . If additional functions
require manipulation, simply press MODE to continue through the Quick Set Menu .
Pressing and holding MODE for 1 second at any time will save all changes, exit the
Quick Set Menu, and prepare the rangefinder for immediate use .
To reset your RX-1600i TBR/W to factory settings, Press POWER to activate the
rangefinder, press and hold MODE, then press and hold POWER . A 10-second
countdown timer will appear; factory reset will occur after 0 has been reached .
Note:
Activating certain modes automatically disables other modes. For example activating
the yards mode will automatically deactivate the meters mode.
12