Continuous Measurement Of A Moving Target/Scan Mode; Clearing The Last Distance Obtained - Leupold RX-1600i TBR/W Complete Operating Instructions

CONTINUOUS MEASUREMENT OF A MOVING TARGET / SCAN MODE:
Follow the instructions for "Measuring distance..." as explained previously .
1 . Once the target has been measured, continue to hold down the POWER button
and follow the object as it moves .
2 . The distance will automatically update as long as the POWER button is
continuously depressed .
3 . This procedure can also be used to obtain the range of multiple animals or
objects; simply move the reticle from one target to another while holding
down the POWER button .

CLEARING THE LAST DISTANCE OBTAINED:

The last range reading taken does not need to be cleared before reading another
object's distance . For that reason, there is no reset button . Simply aim at the new
object using the reticle, depress the POWER button and hold until the new range
reading is displayed .
The ranging accuracy of the Leupold RX -1600i rangefinder is ± 0 .5 yards/meters at
distances less than 125 yards/meters, while the accuracy beyond 125 yards/meters
is ± 2 yards . The maximum range of the unit depends on the reflectivity of the target
and atmospheric conditions .
8