Replacing a BKM
The following sections describe how to replace a BKM backup module.
Checking the BKM backup module
Before you begin
• Confirm that a backup module is installed in the backup module enclosure.
• Confirm that the storage system power is turned on.
• Confirm that the red STATUS LED on the backup module to be replaced is
• Use the Dump tool to collect the storage system configuration information.
Procedure
1.
2.
3.
4.
5.
270
on.
Start the maintenance utility.
Click Hardware > Controller Chassis.
Click the BKMs tab.
To display the most recent status of the BKM, click Refresh.
Confirm that the status of the backup module to be replaced is Warning.
Replacing a backup module
Service Guide for VSP Gx00 and VSP Fx00 Models