Useful Functions; Adjusting Bass Level/ Mid Level/ Treble Level/Subwoofer Level/ Balance (Between Left And Right)/ Fader (Between Front And Rear); Setting The Bass Engine Sq; Using Siri Eyes Free - Alpine CDE-173EBT Owner's Manual

Useful Functions

Adjusting Bass Level/ Mid Level/
Treble Level/ Subwoofer Level/
Balance (Between Left and
Right)/ Fader (Between Front
and Rear)
1
Press /SETUP.
2
Rotate the control dial to adjust the each
mode, then press it.
Each press changes the mode as follows:
BASS MID TREBLE
FADER
Bass Level
Mid Level
Treble Level
Subwoofer Level
Balance
Fader
3
Press /SETUP to return the normal
mode.
Notes
• If no operation is performed for 5 seconds, the unit
automatically returns to normal mode.
• When Bass/Mid/Treble/Subwoofer Level is adjusted,
BASS ENGINE SQ is set to [OFF] (page 17).

Setting the BASS ENGINE SQ

Creating the ideal Bass impact for your musical
taste using BASS ENGINE SQ.
1
Press .
2
Rotate the control dial to adjust [BASS
ENG], then press it.
Setting contents: [OFF], [1]-[6]
Note
When Bass/Mid/Treble/Subwoofer Level is adjusted, BASS
ENGINE SQ is set to [OFF] (page 17).
SUBW BALANCE
-7 to +7
-7 to +7
-7 to +7
OFF to 0 to +15
L15 to R15
R15 to F15
Using Siri Eyes Free (CDE-173EBT/
UTE-73EBT only)
Siri Eyes Free allows you to use an iPhone
handsfree by simply speaking into the
microphone. This function requires you to
connect an iPhone to the unit via BLUETOOTH.
Availability is limited to iPhone 4s or later. Make
sure that your iPhone is running the latest iOS
version.
You must complete BLUETOOTH registration and
connection configurations for the iPhone with
the unit in advance. For details, see "Preparing a
BLUETOOTH Device (CDE-173EBT/ UTE-73EBT
only)" (page 9). To select the iPhone, press
and hold /SETUP for at least 2 seconds, then
select [BLUETOOTH]
21).
1
Activate the Siri function on the iPhone.
For details, refer to the operating instructions
supplied with the iPhone.
2
Press VOICE.
The voice command display appears.
3
After the iPhone beeps, speak into the
microphone.
The iPhone beeps again, then Siri starts
responding.
To deactivate Siri Eyes Free
Press VOICE.
Notes
• The iPhone may not recognize your voice depending
on usage conditions. (For example, if you are in a
moving car.)
• Siri Eyes Free may not function properly, or the
response time may lag in locations where iPhone
signals are difficult to receive.
• Depending on the iPhone's operating condition, Siri
Eyes Free may not function properly, or may quit.
• If you play a track with an iPhone using the BLUETOOTH
audio connection, when the track starts playback via
BLUETOOTH, Siri Eyes Free automatically quits and the
unit switches to the BLUETOOTH audio source.
• When Siri Eyes Free is activated during audio playback,
the unit may switch to the BLUETOOTH audio source
even if you do not specify a track to play.
• When connecting the iPhone to the USB port, Siri Eyes
Free may not function properly, or may quit.
[AUDIO DEVICE] (page
17
-EN