Panasonic FZ-G1 series Operating Instructions Manual page 9

l You can set the Wireless Network after the setup of Windows is
complete.
If "Let's get connected" is displayed, select "Skip this step".
"Join a wireless network" screen may not appear.
CAUTION
l You can change the user name, password, image and security
setting after setup of Windows.
l Remember your password. If you forget the password, you can-
not use Windows. Creating a password reset disk beforehand is
recommended.
l Do not use the following words for user name: CON, PRN, AUX,
CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9, LPT, &, space
@.
In particular, if you create a user name (account
l
name) that includes the "@" mark, a password will be requested
at the log-on screen, even if no password has been set. If you try
to log on without entering a password, "The user name or pass-
word is incorrect." may be displayed and you will not be able to
log on to Windows (è page 27).
l Use standard characters as a computer name: numbers 0
through 9, uppercase and lowercase letters from A to Z, and the
hyphen (-) character.
If the error message "The computer name is not valid" appears,
check if characters other than the above are not entered. If the
error message still remains on the display, set the key entry
mode to English ("EN") and enter characters.
7 Restart the computer
A Touch (Start).
B Touch (Power) - [Restart].
l A portion of the Panasonic PC Settings Utility functions will be
enabled after the computer restarts.
8 Update the on-screen manual
A Connect to the internet.
on to Windows as an administrator.
For further information, refer to
TIONS - Connect to a network.
B Update the on-screen manual.
Double-touch the [Panasonic PC Settings Utility] on
the desktop screen, and then touch [Support] - [Manual] - [Launch
Manual Selector].
Double-touch [Manual Selector] on the desktop.
Follow the on-screen instructions.
9 Create a recovery disc
A recovery disc allows you to install OS and restore its factory default con-
dition, in case, the recovery partition of the fl ash memory is damaged. We
recommend creating a recovery disc before you begin using the computer.
Refer to è OPERATING INSTRUCTIONS - Reference Manual
"Recovery Disc Creation Utility" about creating the disc.
Sign in /
OPERATING INSTRUC-
Log
9