Panasonic FZ-G1 series Operating Instructions Manual page 10

First-time Operation
NOTE
l
You can check the status of the computer, and change the settings. Double-touch [Panasonic
PC Settings Utility] on the desktop to start the utility. (è
Settings Utility")
l PC Information Viewer
This computer periodically records the management information of the flash memory, etc. The
maximum data volume for each record is 1024 bytes.
This information is only used for estimating the cause when the flash memory goes down by
any possibility. They are never sent to outside via network nor used for any other purpose
except for the purpose described the above.
To disable the function, add the check mark for [Disable the automatic save function for man-
agement information history] in [Hard Disk Status] of PC Information Viewer, and touch [OK].
Then follow the on-screen instructions.
(è Reference Manual "Troubleshooting (Advanced)" - "Checking the Computer's Usage
Status")
l
In the default settings, a shortcut icon for Korean language is on the Desktop screen. You may
delete the icon if not necessary.
l
If the recovery partition is deleted, you cannot create Recovery Disc(s).
n Before using wireless function
A Touch (Notification) at the task tray, and then touch (All settings) - [Network & Internet] -
[Airplane mode].
Set [Airplane mode] to [Off], and then;
set [Wi-Fi] to [On] (for wireless LAN).
set [Cellular] to [On] (for wireless WAN).
set [GPS] to [On] (for wireless WAN).
set [Bluetooth] to [On] (for Bluetooth).
A Touch the Wireless Switch Utility icon to show the pop-up menu.
B Select ON for the device you want to enable.
n About the partition structure
You can shrink a part of an existing partition to create unallocated disk space, from which you can
create a new partition.
CAUTION
l Do not add or delete partitions in Windows 10, as the Windows area and recovery partition
must be adjacent to each other in Windows 10.
n
A Touch
l A standard user needs to enter an administrator password.
B Touch [Disk Management].
C Touch and hold the partition for Windows ("c" drive in the default setting), and touch [Shrink
Volume].
l The partition size depends on the computer specifications.
10
Panasonic PC Settings Utility
<For MUI OS model>
<For MUI OS model>
To change the partition structure
(Start) and touch and hold [Computer], then touch [Manage].
Reference Manual "Panasonic PC