Panasonic FZ-G1 series Operating Instructions Manual page 28

Troubleshooting (Basic)
n Display
The screen is dark.
The screen is disor-
dered.
During Simultaneous
display, one of the
screens becomes disor-
dered.
The external display
does not work normally.
Cannot rotate the dis-
play.
n Screen
Cannot operate the
touchscreen.
The pointer does not
work.
Cannot point the cor-
rect position using the
included digitizer pen.
28
l The screen is darker when the AC adaptor is not connected. Open
the Dashboard for Panasonic PC and adjust the brightness. As you
increase the brightness, battery consumption increases.
You can separately set the brightness for when the AC adaptor is
connected and when not connected.
l Turn off the concealed mode (è
ity").
l Under factory default settings, the brightness of the display screen
will adjust automatically based on the ambient light detected by the
ambient light sensor. You can adjust the settings for this sensor
(è page 15).
l Changing the number of display colors and resolution may affect
the screen. Restart the computer.
l Connecting/disconnecting an external display may affect the
screen. Restart the computer.
l When using the Extended Desktop, use the same display colors for
the external display as those used by the LCD. If you continue to
experience problems, try changing the display.
l Simultaneous display cannot be used until Windows startup is com-
plete (during Setup Utility, etc.).
l If the external display does not support the power saving function,
it may not work normally when the computer enters the power sav-
ing mode. Turn off the external display.
l The application program currently running may not support the
image rotation. Quit the program, and then try to rotate the image.
This can ameliorate the status.
l When the automatic rotation is off, screen display does not rotate
automatically.
l If the screen is wet with water drops, wipe them off.
l When using this computer in the state where the screen is wet, wipe
water drops. Then turn the computer on, set touch panel mode to [Touch
(Water)] in "Touch Screen Mode Setting Utility" (è
Manual "Screen Input Operation").
l Before the computer turn on, wipe water drops.
l When using the external mouse, connect it correctly.
l Restart the computer using the external keyboard/mouse.
l If the computer does not respond to external keyboard/mouse com-
mands, read "No response" (è page 29).
l Perform the screen calibration (è
Input Operation" ). Use the pen (included) perpendicularly to the
screen.
l Use the included pen.
l On the Windows logon screen or the Welcome screen, you may
not be able to point the correct position using the included digitizer
pen. Use the external keyboard or the external mouse to log on.
Reference Manual "Setup Util-
Reference
Reference Manual "Screen