Disarming The Vrs - Python 460HP Owner's Manual

Python car alarm model 460hp owner's guide
Hide thumbs Also See for 460HP:
Table of Contents

Advertisement

Fifteen seconds
change to a continuous blast.
From this point on, when the ignition key is turned off, the VRS
will immediately turn on the starter kill. This will prevent the
vehicle from being restarted, thus immobilizing it at that spot.
Three minutes
parking lights and the siren will stop. The starter kill will remain
active until the system is disarmed. If the door is opened or the
ignition is turned off and on in an attempt to restart the car, the
siren and light flashing will begin again.

disarming the vrs

Take the time to familiarize yourself with the VRS
quence and the disarm procedure. It is important to recognize
and identify the VRS
it in case of accidental activation.
Once the VRS
must disarm it the next time you operate the vehicle. You must
disarm it with one of the following procedures:
If the system has not entered the triggered sequence (siren has
not started chirping):
28
after the siren chirps begin, the siren's output will
after the constant siren output begins, the flashing
®
trigger sequence and know how to disarm
®
is armed, it does not disarm automatically. You
®
1. Turn the ignition on.
2. Press
The lights will flash and the siren will chirp
twice.
© 2005 directed electronics, inc. all rights reser ved
on the transmitter for one second.
®
triggering se-
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents