Passive Arming - Python 460HP Owner's Manual

Python car alarm model 460hp owner's guide
Hide thumbs Also See for 460HP:
Table of Contents

Advertisement

passive arming

The system also can be programmed to arm itself automatically
(called passive arming). If the system is programmed for passive
arming, it will automatically arm 30 seconds after the ignition is
turned off and the system "sees" you leave the vehicle by opening
and closing a door. Whenever the system is in its 30-second
passive-arming countdown, the status LED will flash twice as
fast as it does when the system is armed. The siren will chirp one
time 20 seconds after the last door has been closed. The system
is not actually armed at that point. The system arms and the
doors lock (if connected and programmed for passive locking) at
the 30 second mark, but the siren will not chirp. The early chirp
provides you with a 10-second warning prior to arming.
note: If any protected entry point (such as a door or a
switch-protected trunk or hood) is open, the system will
not passively arm (unless forced passive arming is pro-
grammed on). See Programming Options section of this
guide. Additionally, each time a protected entry is trig-
gered during the arming countdown, the 30-second
countdown starts over.
When armed, your vehicle is protected as follows:
Light impacts will trigger the Warn Away
triggered, the siren will chirp and the parking lights will flash
for a few seconds.
Heavy impacts will trigger the system. The triggered
sequence is between 1-180 seconds of constant siren and
flashing parking lights.
8
© 2005 directed electronics, inc. all rights reser ved
signal. When
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents