Arming While Driving - Python 460HP Owner's Manual

➤
Press
chirps twice followed by a long chirp. Zone 2 is now
bypassed.
➤ Press
now bypassed.
➤
Press
four times followed by a long chirp. Zones 2 and 4 are now
bypassed.
➤
Press
five times followed by a long chirp. All input zones, except
the ignition, are now bypassed.
➤ Continued pressing of
Security Arming cycle over again.
note: Multi-Level Security Arming only applies to a sin-
gle arming cycle. Once the system is disarmed and then
re-armed, all the zones will be active again.
➜

arming while driving

Your system can be armed while driving the vehicle. Simply press
on your transmitter for two seconds while the vehicle is
running or while the ignition is on. The siren will chirp once and
then once more to indicate that the ignition is on. The security
system will not respond to any input except the door triggers and the
Failsafe Starter Kill (if installed) will not be activated. The security
®
system will disarm automatically whenever the ignition is turned off.
The siren will chirp twice and the LED will stop flashing.
10
a second time within five seconds: The siren
three times followed by a long chirp. Zone 4 is
a fourth time within five seconds: The siren chirps
a fifth time within five seconds: The siren chirps
© 2005 directed electronics, inc. all rights reser ved
will begin the Multi-Level