Table of Contents
Advertisement
SPECIFICATION
GENERAL
Supply Voltage
Current Consumption
Power Output
Unit Dimensions
FM SECTION
Frequency range
Effective sensitivity
I.F Frequency
AM SECTION
Frequency range
Effective sensitivity
I.F Frequency
RCA LINE OUT (OPTION)
Output
CD PLAYER
System
Suitable CDs
Signal format
Frequency characteristics
S/N Ratio to CD
Number of channels
13
DC 13.8V. Negative Ground
Max.10A
25W X 4.
178[W] X 165[D] X 50[H] mm.
87.5MHz -107.9MHz
3uV.
10.7MHz.
530KHz - 1710KHz
40dB.
450KHz
CD Max. 1200mv
Compact Disc Audio System.
CD/CD-R/CD-RW/MP3 Disc
Sampling frequency 44.1KHz.
NO. of quantization bits 1bit.
20-100Hz < 5dB
10-20KHz < 5dB.
50dB [1KHz]
2 STEREO channels.
LOCATION AND FUNCTION OF CONTROLS
1. OPEN BUTTON
Press the OPEN button to fold down the front control panel.
Then a CD can be inserted into the CD slot or ejected by pressing the EJ
button at the back of the front control panel.
2.3. SEL BUTTON (Select) AND VOL(MENU)+/- KNOB
a) Press the SEL button briefly to select the mode of sound mode item by
item, such as VOLUME, BASS, TREBLE, BALANCE and FADER.
Now the settings of them can be adjusted by rotating the VOL + /- knob.
(Note: If equalizer settings such as POP and JAZZ have been selected
in DSP, it is impossible to change to BASS and TREBLE.)
b) Press the SEL button and hold for more than 1 second to access the
menu mode. Now press the SEL button briefly to select the menu mode
as follows: DSP (DSP OFF / POP M / JAZZ M / CLASS M / FLAT M),
BEEP ON/OFF, SEEK 1/2, VOL LAST/ADJ.
2
Advertisement
Table of Contents
