Advertisement
*HWWLQJ 6WDUWHG
,QVWDOOLQJ WKH 3RUWDEOH
)ULFWLRQ 0RXQW
If you are using a portable friction
mount, you should follow these
instructions.
1. Plug the vehicle power cable
into the mini-USB connector
on the cradle
➌
➊
➋
2. Snap the cradle onto the arm
2
➌
.
➍
➍
3. Slide the locking lever
base to the unlocked position.
➊
➋
4. Slide the disk on the bottom
of the arm into the base until it
clicks.
5. Slide the locking lever to the
locked position.
6. Fit the bottom of the device into
.
the cradle.
➎
on the
➎
d zl 560 Owner's Manual
Advertisement
