TP-Link Archer C50 User Manual page 83

Chapter 5
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Wireless > WPS.
3. Follow a method below to connect your client device to the router's Wi-Fi network.
Method 1: Press the WPS Buttons on the Router and Client Device
For details, refer to Method 3: Use the WPS button
Method 2: Press the WPS Button on Your Client Device
1. Keep the WPS Status as
2. Select Press the WPS button of the new device within the next two minutes
Connect.
3. Within two minutes, press the WPS button on your client device.
4. A success message will appear on the WPS page if the client device has been
successfully added to the router's network.
Method 3: Enter the Client's PIN
1. Keep the WPS Status as
Configure the Router in Access Point Mode
Enabled and click Add
Enabled and click Add
of Connect Your Router.
Device.
Device.
and click
78