TP-Link Archer C50 User Manual page 110

1 ) Confirm your internet Connection Type, which can be learned from the ISP.
http://tplinkwifi.net
2 ) Visit
router.
3 ) Go to Network
4 ) Select your WAN Connection Type
5 ) Click Save.
6 ) Restart the modem and the router.
• Please upgrade the firmware of the router.
If you've tried every method above but cannot access the internet, please contact the
technical support.
Q6. What should I do if I cannot find my wireless network or I cannot
connect the wireless network?
If you fail to find any wireless network, please follow the steps below:
• Make sure the wireless function of your device is enabled if you're using a laptop with a built-in
wireless adapter. You can refer to the relevant document or contact the laptop manufacturer.
• Make sure the wireless adapter driver is installed successfully and the wireless adapter is
enabled.
• On Windows 7
1 ) If you see the message
function is disabled or blocked somehow.
2 ) Clicking Troubleshoot
, and log in with the username and password you set for the
> WAN.
and fill in other parameters.
No connections are
and windows might be able to fix the problem by itself.
available, it is usually because the wireless
105