Password - TP-Link Archer C50 User Manual

Chapter 5
3. Enable the auto reboot function as needed.
• Disable - Disable the auto reboot function.
• Timeout - Specify a time period(1-72 hours), then the router will reboot
automatically after every this interval.
• Schedule - The router will reboot automatically according to a specific time
schedule.
Some settings of the router will take effect only after rebooting, including:
• Change the LAN IP Address (system will reboot automatically).
• Change the DHCP Settings.
• Change the Working Modes.
• Change the Web Management Port.
• Upgrade the firmware of the router (system will reboot automatically).
• Restore the router to its factory defaults (system will reboot automatically).
• Update the configuration with the file (system will reboot automatically).
5. 9. 9.

Password

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools
and password of the router.
> Password, and you can change the factory default username
Configure the Router in Access Point Mode
96