Optimizing The Image - ViewSonic PX727-4K User Manual

The table below demonstrates the effects of the aspect ratio settings on projectors with
different native resolutions. Please see
display resolution of your projector.
In the pictures below, the black portions are inactive areas and the white portions are active
areas. OSD menus can be displayed on those unused black areas.
Aspect ratio setting
Auto
4:3
16:9
2.35:1

Optimizing the image

Selecting a picture mode
The picture mode cannot be adjusted when the DISPLAY > Silence menu is set at On.
The projector is preset with several predefined picture modes so that you can choose one to
suit your operating environment and input signal picture type.
To select an operation mode that suits your need, you can follow one of the following steps.
• Press the picture mode selection buttons on the remote control.
• Go to the PICTURE > Picture Mode menu and press
Picture modes for different types of signals
The picture modes available for different types of signals are listed below.
1. Bright mode: Maximizes the brightness of the projected image. This mode is suitable
for environments where extra-high brightness is required, such as using the projector
in well lit rooms.
2. Standard mode: Is designed for normal circumstances under daylight environment.
3. Movie mode: Is appropriate for playing colorful movies, video clips from digital
cameras or DVs through the PC input for best viewing in a blackened (little light)
environment.
4. User 1/User 2: Recalls the customized settings. After User 1/User 2 is selected, some
of the sub-menus under the PICTURE menu can be adjusted, according to your
selected input signal.
"Projector specifications" on page 50
When the native aspect ratio of your projector is...
4:3 16:9
22
for the native
16:10
Not available
/ to select a desired mode.