Hiding The Image - ViewSonic PX727-4K User Manual

Please refer to the illustration to the right for
how the colors relate to each other.
For example, if you select Red and set its
range at 0, only pure red in the projected
picture will be selected. Increasing its range
will include red close to yellow and red close
to magenta.
5. Press to highlight Gain and adjust its
values to your preference by pressing
The contrast level of the primary color you
select will be affected. Every adjustment
made will reflect to the image immediately.
6. Press to highlight Saturation and adjust
its values to your preference by pressing
the image immediately.
For example, if you select Red and set its value at 0, only the saturation of pure red
will be affected.
Saturation is the amount of that color in a video picture. Lower settings produce less
saturated colors; a setting of "0" removes that color from the image entirely. If the saturation
is too high, that color will be overpowering and unrealistic.
7. Repeat steps 3 to 7 for other color adjustments. Make sure you have made all of the
desired adjustments.
Using the MoviePro menu
Go to the PICTURE > Advanced > MoviePro menu and you can adjust the following
items.
• Color Enhancement: Allows you to fine-tune the saturation of colors with larger
flexibility. It modulates complex color algorithms to flawlessly render saturated colors,
fine gradients, intermediate hues and subtle pigments.
• Skin Tone: Provides a smart adjustment of hue only for calibrating people's skin color,
not other colors in the image. It prevents discoloration of skin tones from the light of the
projection beam, portraying every skin tone in its most beautiful shade.
• Super Resolution: It is a super-resolution technology which radically enhances Full
HD content in terms of colors and textures. It's also a detail enhancement technology
refines surface details for true-to-life images that pop off the screen. Users can adjust
levels of sharpness and detail enhancement for optimal viewing.

Hiding the image

In order to draw the audience's full attention to the presenter, you can press Blank on the
projector or remote control to hide the screen image. Press any key on the projector or
remote control to restore the image. The word 'BLANK' appears at the central bottom area
of the screen.
Once Blank is pressed, the projector consumes minimum power.
CAUTION
Do not block the projection lens from projecting as this could cause the blocking object to
become heated and deformed or even cause a fire.
RED
Magenta
/ .
/ . Every adjustment made will reflect to
25
Yellow
GREEN
Cyan
BLUE