In the pictures below, the black portions are inactive areas and the white portions are active
areas. OSD menus can be displayed on those unused black areas.
Aspect ratio setting
Auto
4:3
16:9
16:10
Panorama
2.35:1
Anamorphic
Optimizing the image
Selecting a picture mode
The projector is preset with several predefined picture modes so that you can choose one to
suit your operating environment and input signal picture type.
To select an operation mode that suits your need, you can follow one of the following steps.
•
Press Color Mode to display the selection bar and press
or press Color Mode repeatedly.
•
Go to the IMAGE > Color Mode menu and press Enter. Press
desired mode.
Picture modes for different types of signals
The picture modes available for different types of signals are listed below.
When the native aspect ratio of your projector is...
4:3
Not
Not available
available
Not
available
Not
available
28
16:9
/
to select a desired mode
16:10
Not available
/
to select a