Other Functions; Important User Information; Technical Data - 3M MT*H7AWS5 Manual

Peltor ws headset xp, mt*h7*ws5 series
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
GB
Battery type
2xAA Alkaline, 1,5 V
Rechargeable (NiMH, 1,2 V)
Reset to Factory Default
Resets all functions to the factory settings.
Hold Bluetooth button to confirm (B:8)

4. OTHER FUNCTIONS

• The last settings are stored when the headset is switched off.
• Low battery level is indicated by a voice message: "low battery".
• Digital noise reduction on the boom microphone

5. IMPORTANT USER INFORMATION

The headset must be fitted, adjusted and maintained in accordance with the instructions given in this manual.
The headset must be worn at all times in noisy surroundings and be inspected regularly for serviceability.
NOTICE! 100% use of a proper hearing protector is the only certain protection from hearing loss.
In environments with more than 82 dB A-weighted noise level, you need to protect your hearing. The hearing receptors in
your inner-ears may be irreparably damaged if you lift a cup of your hearing protectors for even a very short time in a noisy
environment.
The use of a comfortable hearing protector, designed for the specific noise level in which it is used, is the best guarantee to
that you will wear the hearing protector 100% of the time to protect yourself from permanent hearing loss.
For best protection, brush aside excess hair around your ears so the cushions fit snugly on your head. The arms/bands of any
spectacles or goggles worn should be as thin as possible to allow the hearing protector to fit closely to the head.
This hearing protector provides an entertainment audio facility. The the entertainment audio signal is limited to 82 dB(A)
effective to the ear for a maximum input signal level over the Bluetooth protocol.
Warning! The audibility of warning signals may be impaired while using the entertainment facility. This ear-muff is provided
with electrical audio input. The wearer should check correct operation before use. If distortion or failure is detected, the wearer
should refer to the manufacturers advice.
IMPORTANT! For the best protection, brush aside hair around the ears so the ear cushions fit snugly against the head.
Spectacle frames should be as thin as possible and fit close to the head to minimise acoustic leakage.

6. TECHNICAL DATA

6:1 Attenuation values, SNR (F)
The attenuation values and noise levels for the headset are tested and approved according to EN 352-1:2002, EN 352-3:2002,
EN 352-8:2008. Testing performed and Certificate issued by Combitech AB, Box 168, SE-73223 Arboga, Sweden, ID2279
Explanation of the attenuation data tables:
1. Weight
2. Frequency (Hz)
3. Mean attenuation (dB)
4. Standard deviation (dB)
5. Assumed Protective Value (dB)
6:2 Battery type
Many types of AA 1.2–1.5V batteries can be used (NiMH, NiCd, Alkaline), but only NiMH and NiCd batteries can be recharged.
6:3 Battery life
The expected battery life may vary depending on the brand of batteries and the temperature in which the product is used. Low
battery level is indicated by a voice saying: "low battery". The headset functions will not work optimally if the battery is low.
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mt*h7p3*ws5Mt*h7bws5

Table of Contents