Dell PowerConnect J-EX4200-24T Software Manual page 303

lldpd-service —(J-EX Series switch only) (Optional) Restart the Link Layer Discovery
Protocol process.
mib-process —(Optional) Restart the Management Information Base (MIB) II process,
which provides the router's MIB II agent.
mountd-service —(J-EX Series switch only) (Optional) Restart the service for NFS mounts
requests.
—(J-EX Series switch only) (Optional) Restart the multicast snooping
multicast-snooping
process.
—(Optional) Restart the pgcpd service process running on the Routing Engine.
pgcp-service
This option does not restart pgcpd processes running on mobile station PICs. To
restart pgcpd processes running on mobile station PICs, use the
option.
—(Optional) Restart the process that implements the Pragmatic General Multicast
pgm
(PGM) protocol for assisting in the reliable delivery of multicast packets.
—(Optional) Restart the logging process for some PICs. With this
pic-services-logging
process, also known as fsad (the file system access daemon), PICs send special
logging information to the Routing Engine for archiving on the hard disk.
ppp —(Optional) Restart the Point-to-Point Protocol (PPP) process.
—(Optional) Restart the Point-to-Point Protocol over Ethernet (PPPoE) process.
pppoe
protected-system-domain-service
(PSD) process.
redundancy-interface-process
remote-operations —(Optional) Restart the remote operations process, which provides
the ping and traceroute MIBs.
root-system-domain-service
routing —(J-EX Series switch only) (Optional) Restart the routing protocol process.
routing <logical-system logical-system-name>
process, which controls the routing protocols that run on the router or switch and
maintains the routing tables. Optionally, restart the routing protocol process for the
specified logical system only.
—(Optional) Restart the sampling process, which performs packet sampling
sampling
and cflowd export.
secure-neighbor-discovery
Neighbor Discovery Protocol process.
service-deployment —(Optional) Restart the service deployment service process.
Chapter 17: Operational Mode Commands for System Setup
—(Optional) Restart the Protected System Domain
—(Optional) Restart the ASP redundancy process.
—(Optional) Restart the Root System Domain (RSD) service.
—(Optional) Restart the routing protocol
—(J-EX Series switch only) (Optional) Restart the secure
services pgcp gateway
231