Configuring System Identity For A J-Ex Series Switch (J-Web Procedure) - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Table 31: Date and Time Settings
Time
Time Zone
Set Time
Related
Documentation

Configuring System Identity for a J-EX Series Switch (J-Web Procedure)

168
NOTE: After you make changes to the configuration in this page, you
must commit the changes for them to take effect. To commit all changes
to the active configuration, select
the Commit Options to Commit Configuration Changes (J-Web
Procedure)" on page 334 for details about all commit options.
Function
Identifies the timezone that the switching
platform is located in.
Synchronizes the system time with that
of the NTP server. You can also manually
set the system time and date.
J-Web User Interface for J-EX Series Switches Overview on page 129
To configure identification details for a J-EX Series switch:
Select Configure > System Properties
1.
displays configuration details.
To modify the configuration, click
2.
as described in Table 32 on page 169.
NOTE: After you make changes to the configuration in this page, you must
commit the changes for them to take effect. To commit all changes to
the active configuration, select
Commit Options to Commit Configuration Changes (J-Web Procedure)"
on page 334 for details about all commit options.
Commit Options
Your Action
Select the appropriate time zone from
the list.
To immediately set the time, click one:
Synchronize with PC time
synchronizes the time with that of the
PC.
NTP Servers
request to the NTP server and
synchronizes the system time.
Manual—A pop-up window allows you
to select the current date and time
from a list.
> System Identity . The System Identity page
. Enter information into the System Identity page
Edit
Commit Options
> Commit . See "Using
—The switch
—The switch sends a
> . See "Using the
Commit