Intercom - Panasonic KX-TGC380C Operating Instructions Manual

Making/Answering Calls
2
To switch between calls, press MCALL
WAITN.
Note:
R Please contact your phone service provider
for details and availability of this service in
your area.
Temporary tone dialing (for
rotary/pulse service users)
Press * (TONE) before entering access
numbers which require tone dialing.
Call share
While you are on an outside call, another unit
can join the conversation. Only 2 units can join
an outside call.
Note:
R To prevent other users from joining your
conversations, turn privacy mode on
(page 18).
Transferring calls, conference
calls
1
During an outside call, press
MINTERCOMN.
When 3 or more handsets are
registered:
MbN: Select the desired unit. a MSELECTN
2
Wait for the paged party to answer.
R If the paged party does not answer,
press M N to return to the outside
call.
3
To complete the transfer:
Press MOFFN.
To establish a conference call:
MMENUN a MbN: "Conf." a MSELECTN
R To leave the conference, press MOFFN.
R To put the outside call on hold:
MMENUN a MbN: "Hold" a
MSELECTN
To resume the conference: MMENUN
a MbN: "Conf." a MSELECTN
R To cancel the conference: MMENUN a
MbN: "Stop conference" a
MSELECTN
For assistance, visit www.panasonic.ca/english/support
12
TGC38x(en)_1204_ver011.pdf

Intercom

Making an intercom call
1
12
MINTERCOMN.
When 3 or more handsets are
registered:
MbN: Select the desired unit. a MSELECTN
2015/12/04 16:50:47