Making/Answering Calls; Making Calls; Answering Calls; Useful Features During A Call - Panasonic KX-TGC380C Operating Instructions Manual

Making calls

1
Lift the handset and dial the phone
number.
R To correct a digit, press MCLEARN.
2
M N or MZN
R To adjust the receiver or speaker
volume, press MDN or MCN repeatedly.
3
When you finish talking, press MOFFN.
Note:
R To switch back to the receiver, press MZN/
M N.
Making a call using the redial list
The last 5 phone numbers dialed are stored in
the redial list.
1
MEN REDIAL
2
MbN: Select the desired entry. a M
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 14).
Example: If you need to dial the line access
number "9" when making outside calls with a
PBX:
1
9 a MDN (Pause)
2
Dial the phone number. a M

Answering calls

1
Lift the handset and press M
when the unit rings.
2
When you finish talking, press MOFFN.
Auto talk: You can answer calls simply by
lifting the handset (page 17).
Temporary handset ringer off: Press M
For assistance, visit www.panasonic.ca/english/support
TGC38x(en)_1204_ver011.pdf
Adjusting the handset ringer volume
Press MDN or MCN repeatedly while ringing.
Useful features during a
call
Hold
1
2
3
Note:
R After holding for 10 minutes, the call is
Mute
N
1
2
Flash
MFLASHN allows you to use the special
features of your host PBX.
Note:
R To change the flash time, see page 18.
For call waiting or Call Waiting
Caller ID service users
N
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your phone
service provider.
This feature allows you to receive calls while
you are already talking on the phone. If you
N or M N
receive a call while on the phone, you will hear
a call waiting tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller's information is displayed on the
handset that is in use after you hear the call
N.
waiting tone.
1
11

Making/Answering Calls

Press MMENUN during an outside call.
MbN: "Hold" a MSELECTN
To release hold, press M
disconnected.
Press MMUTEN during a call.
To return to the call, press MMUTEN.
Press MCALL WAITN to answer the 2nd
call.
N.
11
2015/12/04 16:50:47