1 Package Contents
Touch Unit
The following parts are packaged with your projector and are necessary when attaching the Touch Unit. When
installing the Touch Unit on a non-magnetic screen or whiteboard, you will also need three M4 screws.
Marker (x2)
Touch Unit connection cable
Touch Unit Bracket
The following parts are packaged with your projector and are necessary when attaching the Touch Unit above
the frame of a whiteboard. When installing the installation plate, you will also need three (3) M4 wood screws
or M4 anchor bolts (not included).
Installation plate
M4 × 12 mm hexagon
socket head cap bolt (×2)
Touch Unit
Tape (approx. 2.4 inches
Label (×4)
[6 cm]) for securing the
markers (×12)
M4 × 25 mm hexagon
socket head cap bolt (×2)
6
Spacer for screw hole (×3)
Infrared deflector (approx.
11.2 inches [28.5 cm]) (×8)
Securing plate
M4 × 55 mm and M4 × 70 mm
hexagon socket head cap bolts