Installing The Touch Unit Above A Whiteboard; Turn On The Projector; Display The Installation Pattern - Epson Brightlink 695Wi+ Installation Manual

Installing the Touch Unit above a whiteboard

Follow the steps below to use the Touch Unit Bracket to install the Touch Unit above the frame of a
whiteboard. Some menus may differ slightly from the illustrations, but the installation instructions are the
same.
Install the Touch Unit Bracket on a flat, smooth, unwarped surface. If there is
unevenness on the screen surface of more than 0.2 inch (5 mm) in any direction, your
fingers may not be detected and finger touch operations may not be performed
correctly.
A

Turn on the projector

B

Display the installation pattern

1. Press the Menu button on the remote control or the projector control panel.
2. Select Easy Interactive Function from the Extended menu.
3. Select Touch Unit Setup.
Remote Control
Remote Control
11
Control Panel
Control Panel