QoS Configuration Guide |
WatchGuard M200
5.
Now we need to finalize the configuration of the RingCentral Policy. Under the 'Settings' tab: (Figure 4)
a)
In the 'From' table, change it from 'Any-trusted' to 'Any', change if you have VLANs setup and want to specific 'From' endpoints.
b)
In the 'To' table, hit 'Add' and select the previously added 'RingCentral Servers'. Remove the default entry 'Any-External'.
c)
Enable "Specify custom idle timeout" by hitting the checkbox, and change the value to '300'.
| Configure Your Firewall
Figure 4
7