Test Your Connection Quality - Watchguard Firebox M200 Configuration Manual

QoS Configuration Guide | WatchGuard M200

Test Your Connection Quality

RingCentral provides a VoIP Quality test
between your computer and RingCentral, and provide an estimate of
the voice quality you should expect when using our service. For the
most accurate results, run this test at least three different times
throughout a business day, and during peak usage times, while
connected to the network that you plan to use for RingCentral.
A two-minute test is typically sufficient, while longer tests are useful
to find intermittent problems or to simultaneously test VoIP
performance along with other traffic, such as file transfers or remote
access.
Select the maximum number of simultaneous users you expect to
support, and set the test duration between 1 and 5 minutes; 2
minutes is considered sufficient in most instances.
Click jitter and packet loss on the
the overall quality of your expected VoIP connection.
MOS score (Mean Opinion Score) refers to a test that has been used
for decades in telephony networks to obtain the human user's view of
the quality of the network. The MOS is the arithmetic mean of all the
individual scores, and can range from 1 (worst) to 5 (best). A MOS
score of 4 is good.
| Quality of Service
that will simulate VoIP calls
RESULTS SUMMARY panel to view
11