Watchguard Firebox M200 Configuration Manual page 6

QoS Configuration Guide | WatchGuard M200
4. In Figure 2 above, under 'Select Policy Type' hit 'Custom'. Then hit 'Add'.
a) Name your new policy "RingCentral".
b) Keep 'Type' as Packet Filter.
c) Under Protocols, enter all applicable RingCentral ports.
Current ports can be found
d) Enable "Specify custom idle timeout" by hitting the checkbox,
and change the value to '300'.
e) Hit 'Save'. Then hit 'Add Policy'.
| Configure Your Firewall
here in Appendix B. (Figure 3)
Figure 3
6