Brother QL-1110NWB User Manual page 46

Change the Label Printer Settings
3 Settings Tabs
Contains settings that may be specified or changed.
Note
If appears on a tab, the settings in that tab cannot be changed. In addition, the settings in the tab will
not be applied to the Label Printer even if you click Apply. The settings in the tab will not be saved or
exported when you use the Save in Command File or Export commands.
4 Current Settings
Retrieves the settings from the currently-connected Label Printer and displays them in the dialog box.
Settings will also be retrieved for parameters on tabs with
5 Disable these settings
When this check box is selected,
changed.
Settings in a tab where
addition, the settings in the tab will not be saved or exported when you use the Save in Command File
or Export commands.
6 Parameters
Displays the current settings.
7 Exit
Exits Device Settings and returns to the main window of the Printer Setting Tool.
8 Apply
Applies the settings to the Label Printer.
To save the specified settings in a command file, select Save in Command File from the drop-down list.
The saved command file can be used with the mass storage mode to apply the settings to a Label Printer.
For more information, see Mass Storage Mode on page 70.
appears on the tab, and the settings can no longer be specified or
appears will not be applied to the Label Printer even if Apply is clicked. In
.
4
37