Brother QL-1110NWB User Manual page 149

Troubleshooting
Problem
When printing via the USB Cable, the
Label Printer repeatedly pauses and
then continues printing.
Solution
• Is the Label Printer set for sequential printing?
If so, set print mode to buffered printing.
®
For Windows 7 / Windows Server
Open the printer properties by clicking Start > Devices and Printers,
right-clicking the Label Printer you want to set up, and then clicking Printing
preferences.
Click the Other tab and select the option After one page of data is
received.
®
For Windows 8 / Windows
®
Server 2012 R2:
Open the printer properties by clicking Control Panel in the Apps screen >
Hardware and Sound > Devices and Printers, right-clicking the Label
Printer you want to set up, and then clicking Printing preferences.
Click the Other tab and select the option After one page of data is
received.
®
For Windows 10 / Windows Server
Open the printer properties by clicking Start > Settings > Devices >
Printers & scanners > Devices and Printers, right-clicking the Label
Printer you want to set up, and then clicking Printing preferences.
Click the Other tab and select the option After one page of data is
received.
• An alternative solution is to disconnect the LAN cable until USB printing is
completed.
®
2008 / Windows Server
® ®
8.1 / Windows Server
®
2016:
®
For Windows
® 18
2008 R2:
2012 / Windows
140