Wired Lan / Wireless Lan Tabs - Brother QL-1110NWB User Manual

Change the Label Printer Settings

Wired LAN / Wireless LAN Tabs

TCP/IP (Wired/Wireless)
• Boot Method
Selects AUTO, BOOTP, DHCP, RARP, or STATIC.
• IP Address/Subnet Mask/Gateway
Specifies the various networking values.
You can enter these settings only when the IP address is set to STATIC.
• DNS Server Method
Selects AUTO or STATIC.
• Primary DNS Server IP Address/Secondary DNS Server IP Address
You can enter these settings only when the DNS server is set to STATIC.
IPv6
• Static IPv6 Address
Specifies a permanent IPv6 address.
• Enable this address
Enables the specified static IPv6 address.
• Primary DNS Server IPv6 Address/Secondary DNS Server IPv6 Address
Specifies the DNS server IPv6 addresses.
• IPv6 Address List
Displays the list of IPv6 addresses.
Wireless Settings
• Communication Mode
Selects Infrastructure or Ad-hoc.
• SSID (Network Name)
Clicking Search displays the available SSID selections in a separate dialog box.
• Channel
Lists available channels.
Note
This setting is valid only in Ad-Hoc mode.
• Authentication Method/Encryption Mode
The supported encryption modes for the authentication methods are as shown in Communication Modes
and Authentication Methods/Encryption Modes on page 32.
• WEP Key
You can specify a setting only when WEP is selected as the encryption mode.
• Passphrase
You can specify a setting only when WPA/WPA2-PSK is selected as the authentication method.
• User ID/Password
4
4
4
4
4
31