Brother QL-1110NWB User Manual page 146

Troubleshooting
Status LED Wi-Fi LED
(Once for
1 second)
(Once for
2 seconds)
(Twice for
2 seconds)
(Three times
for
2.5 seconds)
(Flashes
1
rapidly )
1
Rapidly = at 0.3 second intervals.
Bluetooth
LED
The DK Roll Compartment Cover is open. Close the DK Roll
Compartment Cover correctly.
Resetting mode is on
For more information, see Reset All Settings to the Factory
Settings Using the Label Printer Buttons on page 132.
Label Printer is in System Off mode
If the orange light flashes at 0.5 second intervals, the Label Printer
is in Cooling mode.
Searching for Label Printers
Data overwrite mode
Label Printer is in Boot mode.
Contact Brother Customer Service.
Roll end error
No media error
Wrong media error
Feed error
Cover open error
Transferred data error
Memory full error
Access point connection error
Security error
Cutter error
Mass storage error
USB host power supply excessive voltage error
USB host unsupported device connection error
USB host HUB connection error
System error
When you press a button other than the Power (
flash pattern changes according to the cause of the error. Contact
Brother Customer Service.
Condition
) Button, the
18
137