Pioneer DVR-940HX-S Operating Instructions Manual page 61

Using the GUIDE Plus+® electronic program guide
• I used the One-Button-Record feature (red
Action button) to set a recording, but I
recorded the wrong channel.
If the channel to be recorded is received
via the external receiver first make sure
that the external receiver was left
switched on. Next, in the Editor Area,
make sure that the channel to be
recorded is correctly set: Access the
Editor Area. Check the source and
program number of the channel that you
wanted to record. Change the source
and preset numbers if incorrect.
If you are recording from the recorder's
internal tuner (the A.TV or D.TV
setting), make sure that the program
number is the same as the preset
number set on this recorder. If they are
different, go to the Editor Area and
change the program number to match
the recorder's preset number.
• The TV listings information doesn't
update.
The latest TV listings information is
automatically downloaded by the
recorder overnight. This only happens if
the recorder is in standby; if the recorder
is left on, it will not download. When not
using the recorder, please switch it into
standby.
Data downloads can take several hours.
The front panel display shows EPG when
downloading. If you switch the recorder
on while EPG is displayed, the download
will be canceled.
• The GUIDE Plus+ system is not
supported in my area, but when I switch
the recorder into standby, after a while the
front panel display shows EPG. Can I stop
this from happening?
If the GUIDE Plus+ system is not
supported in your area, please do not set
the postal code in the GUIDE Plus+
setup (see Setting up the GUIDE Plus+®
system on page 40). When the GUIDE
Plus+ service starts in your area, please
set the postal code again.
• The automatic Host Channel search
failed or the GUIDE Plus+ system
identified the wrong Host Channel for my
region.
You can identify your Host Channel
manually. See Manual Host Channel
setup on page 59 for how to do this.
05
61
En