Disconnecting Wi-Fi Direct (Simple Ap) Connection From The Control Panel; Restoring The Network Settings From The Control Panel - Epson XP-8500 Series User Manual

User's Guide
Disconnecting Wi-Fi Direct (Simple AP) Connection
from the Control Panel
Note:
When Wi-Fi Direct (Simple AP) connection disabled, all computers and smart devices connected to the printer in Wi-Fi
Direct (Simple AP) connection are disconnected. If you want to disconnect a specific device, disconnect from the device
instead of the printer.
1. Tap on the home screen.
2. Tap Wi-Fi Direct.
The Wi-Fi Direct (Simple AP) information is displayed.
3. Tap Change Settings.
4. Tap Disable Wi-Fi Direct.
5. Check the message, and then tap Disable the settings.
6. When a completion message is displayed, tap Close.
The screen automatically closes after a specific length of time if you do not tap Close.
7. Tap Close.
Restoring the Network Settings from the Control
Panel
You can restore all network settings to their defaults.
1. Tap Settings on the home screen.
2. Tap Restore Default Settings > Network Settings.
3. Check the message, and then tap Yes.
4. When a completion message is displayed, tap Close.
The screen automatically closes after a specific length of time if you do not tap Close.
Related Information
"Connecting to a Computer" on page 27
&
"Making Wi-Fi Settings from the Printer" on page 28
&
Network Settings
43