Radio Operation - Pyle PLCDCS300 Owner's Manual

OPERATION

RADIO OPERATION

• BAND SELECTION
At radio mode, press BAND button
(13) to select the desired band.
The reception band will change in the
following order:
FM1 FM2
• STATION SELECTION
- Manual Tune Up/Down
Repeatedly press the
TUNE/TRACK/SKIP
or TUNE/TRACK/SKIP
(17) for manual tuning frequency
downward or upward.
- Seek Tune Up/Down
Press and hold the
TUNE/TRACK/SKIP
or TUNE/TRACK/SKIP
(17) for several seconds for auto
tuning frequency downward or
upward.
• LOCAL/DISTANT
Press LOC button (1) shortly to select
between local and distant stations.
Local setting for reception of strong
station, and a distant setting for
reception of weaker stations. In local
mode, "LOC" will display.
• MONO/STEREO
At FM radio mode, press MO/ST
button (8) to set the reception between
mono mode and stereo mode.
In stereo mode, when stereo
broadcasting station is received, the
" " indicator will appear upon the
display.
• AUTOMATIC MEMORY STORING &
PRESET SCAN
- Automatic Memory Storing
Press AS/PS button (14) over 1
second in radio mode, Auto Store is
started.
FM3 AM1 AM2
button (16)
button
button (16)
button
Stations are searched automatically
from next frequency and detected
station is stored into the preset
memory. In case of LOC state, the
first Auto Store is done by LOC state
and if 6 CH is not fully memorized,
the seconds Auto Store search
continued by Distant state. At the
end of Auto Store operation, mode
is change to Preset Scan.
- Preset Scan
Press AS/PS button (14) shortly in
radio mode, Preset Scan is started.
This operation starts from next
preset number and finished at the
same preset number of which last
channel memory stored.
Frequency of preset memory is
displayed with blinking for 5
seconds. Press AS/PS button (14)
again to release this function.
• STATION STORING
Press and release any one of the
preset buttons (18) (1 - 6) shortly,
(1 - 6) preset memory is called (Preset
Call). Press the button for several
secnds, current frequency is stored
into preset memory and preset number
(1 - 6) is displayed (Preset Store).
7