Siemens CP 1243-7 LTE Operating Instructions Manual page 131

Mechanisms of connection establishment
The request for establishment of a TeleService connection is triggered by the engineering
station. This request is sent via the intranet or Internet to the TeleService server (telecontrol
server or TeleService gateway).
The TeleService server forwards to request to the CP in the S7 station. The TeleService
server sends the request by e-mail to the SMS gateway which converts the e-mail and
forwards it as an SMS to the CP in the S7 station via the mobile wireless network.
The TeleService connection is finally actively established by the CP.
Establishing a TeleService connection
Follow the steps below to establish a TeleService connection to the remote station via the
mobile wireless network from the engineering station:
1. Select the CPU of the remote station in the STEP 7 project.
2. Select the menu "Online" > "Extended go online".
The "Online access" dialog opens.
3. Choose the entry "TeleService via telecontrol" in the "Type of interface" drop-down list.
4. Choose the entry "TeleService board" in the "PG/PC interface" drop-down list.
5. Click on the
The "Establish remote connection via telecontrol" dialog box opens.
6. Make the necessary entries in this dialog.
You will find information on the necessary entries in the tooltips of the STEP 7 online
help.
Information in the "Establish remote connection via telecontrol" dialog.
In this dialog, enter the data previously configured in STEP 7 under the following headings:
● Telecontrol server / TeleService gateway...
Selection whether the TeleServiceTeleService switching station is located on the PC of
the engineering station or in the network or can be reached via the Internet.
– In the latter case, enter the address of the TeleService server.
– Own server password
CP 1243-7 LTE
Operating Instructions, 04/2017, C79000-G8976-C381-03
icon next to the "PG/PC interface" drop-down list.
IP address or name and port number of the telecontrol server that can be resolved by
DNS or of the TeleService gateway
If the option is enabled and the server password is configured in TCSB, enter the
password to authenticate the CP with the telecontrol server.
The server password is not required for TeleService via a TeleService gateway.
Diagnostics and upkeep
6.5 TeleService
131