Serial Ata3 Connectors; Usb 2.0 Header; Usb 3.0 Header - ASROCK H110M-HDV R3.0 Manual

Chassis Intrusion and
Speaker Header
(7-pin SPK_CI1)
(see p.1, 2, 3, 4, No. 11)

Serial ATA3 Connectors

(SATA3_0_1:
see p.7, 8, 9, 10, No. 7)
(SATA3_2_3:
see p.1, 2, 3, 4, No. 6)

USB 2.0 Header

(9-pin USB_4_5)
(see p.1, 2, 3, 4, No. 9)

USB 3.0 Header

(19-pin USB3_3_4)
(see p.1, 2, 3, 4, No. 8)
18
SPEAKER
DUMMY
DUMMY
+5V
1
SIGNAL
GND
DUMMY
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
Vbus Vbus
Vbus IntA_P1_SSRX-
IntA_P0_SSRX- IntA_P1_SSRX+
IntA_P0_SSRX+ GND
GND IntA_P1_SSTX-
IntA_P0_SSTX-
IntA_P1_SSTX+
IntA_P0_SSTX+
GND
GND IntA_P1_D-
IntA_P0_D- IntA_P1_D+
IntA_P0_D+
ID
1
Please connect the
chassis intrusion and the
chassis speaker to this
header.
These four SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
There is one header on
this motherboard. Each
USB 2.0 header can
support two ports.
Besides two USB 3.0 ports
on the I/O panel, there
is one header on this
motherboard. Each USB
3.0 header can support
two ports.