Remington RM4030 Operator's Manual page 6

Cordless blower
Table of Contents

Advertisement

Available languages

Available languages

BLOWER SAFETY
Stop the motor, wait for all moving parts to stop, remove the
battery and allow the unit to cool before installing or removing
the blower tube.
Do not insert anything into the air openings or blower tube. Do
not operate the unit if any of the air openings or tubes are
blocked. Keep the air openings free from dust, lint, hair and
anything else that may reduce airflow.
Do not operate the unit without the blower tube securely attached.
Do not use the unit to spray liquids, especially flammable or
combustible liquids, such as gasoline. Do not use the unit in
areas where such liquids are present.
Do not use the unit for spreading chemicals, fertilizer or any
other substance that may contain toxic materials.
Do not set the unit down on any surface while the unit is
running. Debris can be picked up by the air intake and thrown
out the discharge opening, resulting in damage to the unit or
property or causing serious injury to bystanders or the operator.
During operation, never point the unit in the direction of people,
animals, windows or automobiles. Always direct blowing debris
away from people, animals, windows or automobiles.
Use extra caution when blowing debris near solid objects, such
as trees, walls, fences, etc. When possible, blow away from
such objects, not toward them.
Take care when working near valuable plants. The force of the
blown air could damage tender plants.
Never attempt to clear a clogged air intake opening while the
unit is running.
OTHER SAFETY WARNINGS
Maintain the unit with care. Follow all maintenance instructions
in this manual.
Do not perform maintenance procedures other than those
described in this manual. Do not attempt to repair the unit; there
are no user-serviceable parts inside. All service, other than the
maintenance procedures described in this manual, should be
performed by an authorized service center.
Do not use the unit if it is not working correctly, has been
dropped, damaged, left outdoors or dropped into water. Have the
unit serviced by an authorized service center.
Never remove, modify or make inoperative any safety device
furnished with the unit.
Before inspecting, maintaining, cleaning, storing, transporting or
replacing any parts on the unit:
1. Stop the motor. Refer to Starting and Stopping.
2. Wait for all moving parts to stop.
3. Remove the battery.
4. Allow the unit to cool.
Secure the unit while transporting.
Store the unit in a dry place, secured or at a height to prevent
unauthorized use or damage. Keep the unit out of the reach of
children.
Never douse or squirt the unit with water or any other liquid.
Avoid getting water in the motor and electrical connections.
Keep handles dry and clean (free from debris, oil and grease).
Clean the unit after each use. Refer to Cleaning and Storage. Do
not use solvents or strong detergents.
Keep these instructions. Refer to them often and use them to
instruct other users. If you loan this unit to others, also loan
them these instructions.
SAVE THESE INSTRUCTIONS
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rm4030b

Table of Contents