Safety Precautions; Display Care & Cleaning - Pyle View PL2DNTV7 Owner's Manual

2. Keep this manual handy for future reference.
3. Pay close attention to all warnings in this manual and follow the instructions carefully.
4. Never allow others to use the system until they have read and understood the operation
instructions.

SAFETY PRECAUTIONS

1.The unit is designed for using in DC12V, negative ground battery.
2. Do not disassemble or alter the unit in any way. Failure to do so can cause damage to the
unit and invalidate your warranty.
3. Be careful not to run down the car battery while using the unit with the car engine stopped.
4. Never clean the surface of the screen with chemical solvent or corrosive detergent, which
may cause permanent damage to TFT LCD screen.
5. Please note that the normal working temperature of the unit is between 0℃ to 50℃. If the
internal temperature of the vehicle is extremely high, a short cooling down period is
necessary before operating the unit.
6. If the inside of the car is very cold and the monitor is used soon after switch on the heater,
moisture may form on the unit. Turn off the unit immediately! Failure to do so may cause the
internal components to short. Allow the unit to rest for about one hour to allow the
condensation to disappear before continue operation.
7. In extremely cold temperatures, the movement of the picture may be slow and the picture
may be dark .It is not a malfunction .The unit will work normally once it reaches its operating
temperature.
8. Small black and shiny dots inside the liquid crystal panel are normal for liquid crystal panel
are normal for liquid crystal product.
9. Do not drop or hit the LCD panel with a hard object, as it may cause permanent damage to
the LCD panel .If you come into contact with the fluid, do flush and clean effect areas with
plenty of water and seek medical attention immediately.
10. Kindly refer to authorized dealers if you get any questions.
DISPLAY CARE & CLEANING
Wipe off dust gently with a soft, dry cloth.
Avoid scratching: do not rub the display with hard objects.
Do not use any chemical solvent, cleaning agent or corrosive detergent to clean the
display and unit.
2