Table of Contents
Advertisement
TUMBLE DRYING
PRESS THE START BUTTON.
Remaining drying time
An estimate of the remaining drying time will be shown
on the display a few minutes after the drying programme
starts. For example, 1:35 means that it will take
approximately 1 hour and 35 minutes for the load to dry.
If the option.Anti crease has been selected, the drum will
rotate for three seconds per minute for two hours after the
programme is fi nished. The actual remaining time may
be longer than the estimated time shown on the display.
The remaining time is then shown as 0:15 until the load
is suffi ciently dry. If you selected Time Saver the display
will show 0:05 instead. You can stop the tumble dryer by
pressing the Stop button for three seconds or by opening
the door. In both cases the programme is stopped and
starts from the beginning if restarted.
NOTE!
The programme will not be aff ected if you change the
programme selector after the programme has started.
DRYING PROGRAMME FINISHED
The text Done appears on the display when the
programme is fi nished. If the Anti crease option has
been selected, the drum will rotate for three seconds per
minute for two hours after the programme is fi nished..
Backlighting
Two minutes after the drying programme fi nishes the
backlighting on the display and options buttons enters
energy saving mode. Turn the programme selector if you
want to activate the machine.
NOTE!
Clean the lint fi lter in the outer door after each load.
See the Care and cleaning chapter.
WARNING!
If the lint fi lter becomes clogged, the machine's
automatic overheating cut-out may be triggered.
Clean the fi lter, wait until the machine has cooled then
try starting it. If it still doesnot start: Call the service
division.
Once drying has fi nished
Turn off the main power switch. Remove the clothes and
close the door to prevent small children from climbing into
the machine.
10
Advertisement
Table of Contents
