Before You Install; For Usb Interface Users - Brother MFC-J220 Quick Setup Manual

USB

For USB interface users

®
(Windows 2000 Professional/XP/XP Professional x64 Edition/
Windows Vista
14

Before you install

a
Make sure that your computer is ON and you
are logged on with Administrator rights.
IMPORTANT
• For the latest drivers and information, visit
http://solutions.brother.com/
• If there are any programs running, close them.
• The screens may differ depending on your
operating system.
Note
Before installation, if the USB cable is connected
to the computer, the "Found New Hardware
Wizard" dialog box will automatically show,
please cancel it to close the screen.
15
Install MFL-Pro Suite
a
Put the supplied installation CD-ROM into your
CD-ROM drive. If the model name screen
appears, choose your machine. If the language
screen appears, choose your language.
Note
If the Brother screen does not appear
automatically, go to My Computer (Computer),
double-click the CD-ROM icon, and then
double-click start.exe.
b
The CD-ROM Top Menu will appear. Click
Install MFL-Pro Suite and click Yes if you
accept the license agreements. Follow the
on-screen instructions.
10
® ®
/Windows 7)
Note
• If you are using Windows
Professional and have not installed service
pack 3 (SP3) or greater:
To access the PhotoCapture Center™ features
from your computer you may have to install a
®
Windows 2000 update first.
®
The Windows 2000 update is included with
the MFL-Pro Suite installer.
To install the update, follow the steps below:
1 Click OK to start installation of the Windows
updates.
2 When instructed, click OK to restart your
computer.
3 After the computer restarts, the installation of
MFL-Pro Suite will automatically continue.
• If the installation does not continue
automatically, open the top menu again by
ejecting and then reinserting the CD-ROM or
double-click the start.exe program from the
root folder, and continue from b to install
MFL-Pro Suite.
®
• For Windows Vista and Windows
the User Account Control screen appears,
click Allow or Yes.
c
Choose Standard, and then click Next. The
installation continues.
d
When this screen appears, go to the next step.
®
Windows
®
2000
®
®
7, when