Adjusting The Sound - JVC KD-DV6106 Instruction Manual

Adjusting the sound

You can adjust the sound characteristics to your
preference.
1
Ex.: When "FAD" is selected
2
34
Indication pattern changes
as you adjust the level.
Indication To do:
FAD* Adjust the front
1
(fader) and rear speaker
balance.
BAL Adjust the left
(balance) and right speaker
balance.
LOUD Boost low and
(loudness) high frequencies
to produce a well-
balanced sound at
low volume level.
SUB. W* 2 Adjust the
(subwoofer) subwoofer output
level.
VOL. A* 3 Adjust and store
(volume the volume level
adjust) of each source.
VOL* 4 Adjust the
(volume) volume.
1
* If you are using a two-speaker system, set
the fader level to "00."
2
* This takes effect only when a subwoofer is
connected.
3
* You cannot make an adjustment if the source
is FM. "FIX" will appear.
4
* Normally the control dial works as the
volume control. So you do not have to select
"VOL" to adjust the volume level.
5
* Depending on the amplifier gain control
setting. (See page 36 for details.)
Range
R06
(Rear only)
to
F06
(Front only)
L06
(Left only)
to
R06
(Right only)
LOUD ON
J
LOUD OFF
00 (min.)
to
08 (max.)
–05 (min.)
to
+05 (max.)
00 (min.)
to
30 or 50
(max.)* 5